$7.95 FLAT RATE SHIPPING PER ORDER,
Continental Us Only, UPS Ground, take an extra 5% discount at checkout on
orders over $300.00. *Most Items are shipped same day on orders placed before
12:00pm Central Time.
LASER-LITE SOLID-NOSE BARS SOLID NOSE LAMINATED BARS
FOR PROFESSIONAL WOODCUTTERS WHO NEED TO BOTH SAVE MONEY AND HAVE A BAR THAT
STANDS UP TO DIRTY OR ABRASIVE CONDITIONS
PITCHES
BODY TYPE
NOSE TYPE
NOSE RADIUS:
SMALL OR STANDARD
RECOMMENDED SAW SIZES
AVAILABLE LENGTHS
.325"
3/8"
.404"
LAMINATED
SOLID NOSE
SOLID NOSE
3.8 CU. IN. (62 CC) AND SMALLER
12" - 24" (30-61 CM)
FEATURES - Ultra high strength stellite alloy is laser welded to the nose
for long bar life. -Lubri-Dam oil-retaining feature prevents oil from running
out the bar's tail, keeps more oil on the bar and chain. -Laser welding
provides the optimum stellite bond without weakening the bar body, as can
occur with gas welding. -Laminated construction reduces weight and cost while
maintaining excellent performance.
PRO 91 AND PRO 91 INTENZ BARS THE SMALL BARS FOR
FULL-TIME WOODCUTTERS SUCH AS ARBORISTS OR TREE SURGEONS WHO PREFER USING
ULTRA-LIGHTWEIGHT SAWS AND LOW-PROFILE MINI 3/8"-PITCH "91" CHAINS
PITCHES
BODY TYPE
NOSE TYPE
NOSE RADIUS:
SMALL OR STANDARD
RECOMMENDED SAW SIZES
AVAILABLE LENGTHS
MINI 3/8"
LAMINATED
NON REPLACEABLE SPROCKET NOSE
SMALL
2.5 CU. IN. (41CC) AND SMALLER
12" - 16" (30-40 CM)
FEATURES -Slim contour, excellent maneuverability. -Made from silicon -Alloy
steel for high strength and light weight -For use exclusively with "91" chains
-Lubri-Dam oil-retaining feature prevents oil from running out the bar's tail,
keeps more oil on the bar and chain. -Available in models with the Intenz
tensioning mechanism built into the bar itself.
G/M HOLES (WHERE NOTED) - GUARD MATE HOLES ARE BUILT INTO THE NOSES OF CERTAIN
TYPES OF OREGON GUIDE BARS AND ALLOW THE ATTACHMENT OF A GUARD MATE TIP GUARD
TO HELP REDUCE THE RISK OF KICKBACK BARS THAT ARE HIGHLIGHTED ARE INTENZE
BARS
DOUBLE GUARD 91 AND DOUBLE GUARD 91
INTENZ BARS
THE BAR FOR OCCASIONAL WOODCUTTERS USING
ELECTRIC OR SMALL GAS POWERED SAWS WITH LOW KICKBACK MINI 3/8" PITCH 91VG
CHAIN
PITCHES
BODY TYPE
NOSE TYPE
NOSE RADIUS:
SMALL OR STANDARD
RECOMMENDED SAW SIZES
AVAILABLE LENGTHS
MINI 3/8"
LAMINATED
NON REPLACEABLE SPROCKET NOSE
SMALL
ELECTRIC 2.5 CU. IN. (41-58 CC) AND SMALLER
10" - 20" (25-50 CM)
FEATURES -Slim symmetrical contour is light in weight, excellent
maneuverability and reversible for long life. -Lubri-Dam oil-retaining feature
prevents oil from running out the bar's tail, keeps more oil on the bar and
chain.-Small-radius nose helps reduce kickback energies. -Patented Cradle nose
sprocket design increases sprocket-nose life by 150% to 300%. -Available in models with INTENZ tensioning mechanism built into the
bar itself. BARS THAT ARE HIGHLIGHTED ARE INTENZE
BARS
MICRO-LITE AND MICRO-LITE INTENZ BARS
IT TAKES LESS POWER FROM
THE SAWS TO MAKE THE SAME LENGTH OF CUT WITH A NARROW-KERF BAR/CHAIN CUTTING
SYSTEM THAN WITH A STANDARD BAR AND CHAIN. MICRO-LITE IS THE BAR FOR
OCCASIONAL WOODCUTTERS WHO WANT NARROW-KERF ADVANTAGES
PITCHES
BODY TYPE
NOSE TYPE
NOSE RADIUS:
SMALL OR STANDARD
RECOMMENDED SAW SIZES
AVAILABLE LENGTHS
.325" (95VP CHAIN, MLB BARS)
LAMINATED
NON REPLACEABLE SPROCKET NOSE
SMALL
2.2 - 3.5 CU. IN. (35-57 CC)
13" - 20" (33-50 CM)
MINI 3/8" (90SG CHAIN, MLE BARS)
LAMINATED
NON REPLACEABLE SPROCKET NOSE
SMALL
UP TO 2.4 CU. IN.
10" - 16" (25-41 CM)
FEATURES -Thickness of side laminates is reduced to work with narrow kerf
chains -Available in models with INTENZ tensioning mechanism built into the
bar itself.-Available in two gauges: .043" "MLE" bars for use with mini 3/8"
pitch 90SG chain. .050" gauge "MBL" bars for use with .325" pitch 95VP chain.
never install .043" gauge chain on a .050" gauge bar.
*Note - always
install a micro-lite chain in order to obtain all the advantages of a narrow-kerf
cutting. BARS THAT ARE HIGHLIGHTED ARE INTENZE
BARS
