L.A. Sleeve Cylinder Sleeves

Cast Iron cylinder sleeves. Lasco sleeves with exact port specifications, chrome-moly iron alloy, high tensile strength material provide the rebuilder with ease of installation, trouble free boring and a long lasting engine life

CI- Original barrel has a cast iron liner in the cylinder, The cylinder must be bored to accept the new cylinder sleeve. The cut in liner will not be completely removed. The sleeve is designed to insert into the iron lined cylinder.

        RS- The original barrel has a replacement sleeve. Heat the cylinder to remove the sleeve. Re-heat the cylinder to install the new cylinder sleeve.

        CS- Original barrel has a cast in liner in the cylinder. The cylinder must be bored out to accept the new cylinder sleeve. The cut-in liner will not be completely removed, the sleeve is designed to insert into the iron lined cylinder.

        AC- Original cylinder bore is alloy-chrome plated, nikasil, eloctrofused or boron composite. Cylinder must be bored to accept new sleeve.

        CC- Original barrel is cast iron. The cylinder must be bored to accept the new cylinder sleeve.