REPLACEMENT PUMPS FOR RESIDENTIAL UNITS SOLD THROUGH MASS MERCHANTS

-RADIAL AXIAL, HORIZONTAL PUMP
-FLANGED FOR DIRECT COUPLE TO GASOLINE ENGINES
-FORGED MANIFOLD WITH BUILT IN TRAPPED PRESSURE UNLOADER AND INJECTOR
-MAX. INLET PRESSURE 80 PSI.        
-MAX. FLUID TEMP. 140 DEGREES F.
-INLET PORT THREAD 1/2"-14 BSP-M
         -DISCHARGE PORT THREAD 3/8"-19 BSP-M
-SHAFT DIAMETER .750" 
       -PUMP DIMENSIONS 8.875"X7"X8.25"
-CRANKCASE OIL CAPACITY 6.75 OZ.

TC SERIES 60

-TRIPLEX PLUNGER PUMP
-COMPACT DESIGN  
-3/4" HOLLOW SHAFT
-FLANGED FOR DIRECT COUPLE TO GASOLINE ENGINES
-SAE J609A
-PREMIUM BUILT-IN TRAPPED PRESSURE UNLOADER ON LEFT SIDE OF MANIFOLD
WITH AN EXCLUSIVE LIFETIME WARRANTY
-MAX. INLET PRESSURE 125 PSI
       -MAX. FLUID TEMP. 165 DEGREES F.
-INLET PORT THREAD 1/2"-14 BSP-F
- DISCHARGE PORT THREAD 3/8"-19 BSP-F
-GAUGE PORT 1/8" MAX. INLET REQUIRED
-FLOODED PUMP DIMENSIONS 10.4"X8"X7.7"
-CRANKCASE OIL CAPACITY 11.8 OZ.

TX SERIES 63

-TRIPLEX PLUNGER PUMP        -BUILT IN UNLOADER AND DOWNSTREAM INJECTOR ON LEFT SIDE OF MANIFOLD

-1" HOLLOW SHAFT        -FLANGED FOR DIRECT COUPLE TO GASOLINE ENGINES        -SAE J609B       

-LARGE LIGHTWEIGHT CONNECTING RODS        -NEW LONG LIFE LOW AND HIGH PRESSURE SEALS

-FORGED BRASS MANIFOLD WITH EXCLUSIVE LIFETIME WARRANTY

-MAX. INLET PRESSURE 125 PSI.        -MAX. FLUID TEMP. 165 DEGREES F.

-INLET PORT THREAD 1/2"-14 BSP-F        -DISCHARGE PORT THREAD 3/8"-19 BSP-F

-PUMP DIMENSIONS 8.4"X8.3"X4.8"        -MAX. INLET REQUIRED, FLOODED

-CRANKCASE OIL CAPACITY 14 OZ.

EZ SERIES 44

-TRIPLEX PLUNGER PUMP WITH HOLLOW SHAFT    -FLANGED FOR DIRECT COUPLE TO GASOLINE ENGINES

-SAE J609B    -FORGED BRASS MANIFOLD WITH EXCLUSIVE LIFETIME WARRANTY

-FLANGED FOR MOUNTING ON UP TO 13 HP ENGINES

-MAX. INLET PRESSURE 125 PSI.    -MAX. FLUID TEMP. 165 DEGREES F.

-INLET PORT THREAD 1/2-14 BSP-F    -DISCHARGE PORT THREAD 3/8"-19 BSP-F    -SHAFT DIAMETER 1"

-PUMP DIMENSIONS 8.8"X9.7"X6.5"    -MAX. INLET VACUUM 3 FT., WATER (2.6" HG)

-CRANKCASE OIL CAPACITY 14 OZ.

T SERIES 47

-TRIPLEX PLUNGER SHAFT, SOLID SHAFT    -FORGED BRASS MANIFOLD WITH EXCLUSIVE LIFETIME WARRANTY

-HEAVY DUTY TAPERED ROLLER BEARINGS    -OVERSIZED CONNECTING RODS FOR MAX. LIFE

-MAX. INLET PRESSURE 125 PSI.    -MAX. FLUID TEMP. 165 DEGREES F.

-INLET PORT THREAD 1/2"-14 BSP-F    -DISCHARGE PORT THREAD 3/8"-19 BSP-F

-SHAFT DIAMETER .945"    -PUMP DIMENSIONS 12.6X9.2"X6.9"

-MAX. INLET VACUUM 9 FT., WATER (7.9" HG)    -CRANKCASE OIL CAPACITY 40.6 OZ.

T SERIES 47

-TRIPLEX PLUNGER PUMP, SOLID SHAFT   

-NICKEL-PLATED FORGED BRASS MANIFOLD WITH EXCLUSIVE LIFETIME WARRANTY

-HEAVY DUTY TAPERED ROLLER BEARINGS    -OVERSIZED CONNECTING RODS FOR MAX. LIFE

-MAX. INLET PRESSURE 125 PSI.    -MAX. FLUID TEMP. 165 DEGREES F.

-INLET PORT THREAD 1/2"-14 BSP-F    -DISCHARGE PORT THREAD 3/8"-19 BSP-F

-SHAFT DIAMETER .945"    -PUMP DIMENSIONS 12.6"X9.2"X6.9"

-MAX. INLET VACUUM 9FT., WATER (7.9" HG)    -CRANKCASE OIL CAPACITY 40.6 OZ