COMPOSITE SKIS

SLP - THE INDUSTRY LEADER IN SKI DESIGN INTRODUCES THE NEXT EVOLUTION IN
BROAD-RANGE TRAIL SKI TECHNOLOGY.

Our new straight Line Tracking keel design is revolutionizing trail ski performance.

Famous SLP patented rocker keel design.
Straight Line Tracking even on frozen, rutted trails.
Famous SLP "Power Steering" now with even less arm effort than the original Ultra-Lite Ski!
Popular colors. Lightweight and durable (only 6 1/2 lbs. with runner).
Tuned flexibility with maximum strength.
Purchase add on keel blades (below) in conjunction with a 5" Carbide for superior tracking on hard packed snow.
Bolt 6-1/4" Carbides directly on SLT ski for loose trail or powder riding.
Ski warranty for two years from date of purchase against defects in material or workmanship.
Normal wear, sun damage or abuse not covered by warranty policy.

The SLT Skis are sold as component parts that together complete a ski assembly.
All component parts are sold per each except Runners and keel blades which are sold per pair.

TO ORDER THE ULTRA-LITE SLT SKI, FOLLOW THE FOUR STEPS BELOW:

STEP 1: SADDLE MOUNT (ORDER 2 FOR YOUR SLED)

STEP 2: SKI BOTTOM (ORDER 2 OF YOUR COLOR PREFERENCE)

STEP 3: SKI LOOP (ORDER 2 OF YOUR COLOR PREFERENCE)
Straight Line Tracking Ski Loop to fit any of the above SLT ski bottoms - ISR LEGAL

STEP 4: CARBIDES (ORDER ONE PAIR OF YOUR PREFERENCE)

COMPOSITE SKIS

SLP - THE INDUSTRY LEADER IN SKI DESIGN INTRODUCES THE NEXT EVOLUTION IN
BROAD-RANGE TRAIL SKI TECHNOLOGY.

ULTIMATE IN LOOSE SNOW PERFORMANCE FOR MAXIMUM FLOTATION AND PRECISE STEERING CONTROL

-DEEP SNOW STEERING ABILITY IS DRAMATICALLY INCREASED
-LOW SPEED SNOW MOBILITY IS ALSO SUBSTANTIALLY INCREASED
-EXHIBITS A UNIQUE MULTI-LEVEL KEEL DESIGN TO PROVIDE AGGRESSIVE STEERING ABILITY WITH MINIMAL ARM EFFORT OVER A BROAD RANGE OF CONDITIONS
- THE UPPER KEEL AIDS THE LOWER KEEL WHEN MANEUVERING IN DEEP POWDER OR LOOSE CONDITIONS
-THE SIDEWALL SURFACE AREA OF THE UPPER KEEL TO THE SIDEWALL SURFACE AREA OF THE LOWER KEEL TO PROVIDE OPTIMUM STEERING CONTROL IN DEEP POWDER OR LOOSE SNOW CONDITIONS

POWDER CONTROL WINGS AID IN MAINTAINING PROPER SKI ATTITUDE (KEEPING SKIS PARALLEL TO THE SNOW) IN DEEPER POWDER SNOW. ALSO, DUE TO FRONT SUSPENSION CAMBER ONE SIDE OF THE SKI WILL LIFT (APPROXIMATELY 8 DEGREES) IN A TURN. THE POWDER CONTROL WING COMPACTS THE SNOW UNDER IT RATHER THAN ALLOWING IT TO WASH OVER THE TOP. THIS DRAMATICALLY INCREASES THE POWDER PRO SKI'S ABILITY TO TURN IN LOOSE SNOW. CONTROL WHILE SIDEHILLINGS GREATLY INCREASED DUE TO THE ADDITIONAL STEERING  CONTROL. THESE SKIS ALSO HELP ELIMATE THE TENDENCY THAT  LONG, AGGRESSIVE TRACKS HAVE TO PUSH THROUGH THE CORNERS. RECOMMENDED FOR MOUNTAIN/POWDER USE, THIS SKI WORKS AMAZINGLY WELL IN SNOWCROSS TYPE CONDITIONS. 

The SLT Skis are sold as component parts that together complete a ski assembly.
All component parts are sold per each except Runners and keel blades which are sold per pair.

TO ORDER THE ULTRA-LITE SLT SKI, FOLLOW THE FOUR STEPS BELOW:

STEP 1: SADDLE MOUNT (ORDER 2 FOR YOUR SLED)

All Narrow Brackets using 7/16" x 3" Bolts - Saddle Only

STEP 2: SKI BOTTOM (ORDER 2 OF YOUR COLOR PREFERENCE)

STEP 3: SKI LOOP (ORDER 2 OF YOUR COLOR PREFERENCE)
Straight Line Tracking Ski Loop to fit any of the above SLT ski bottoms - ISR LEGAL

STEP 4: CARBIDES (ORDER ONE PAIR OF YOUR PREFERENCE)
 

UNI-SKI
SOLD IN PAIRS
A COMPOSITE SKI MADE FOR REAL TRAIL RIDING - GLIDING THRU THE SNOW WITHOUT STICKING AND LESS RESISTANCE THAN METAL SKIS GIVING EXCEPTIONAL STEERING PRECISION AND CONTROL. A FIVE POSITION MODULE ALLOWS DRIVER TO CUSTOMIZE THE STEERING BALANCE AND FEEL.

TO ORDER SKIS FOLLOW THE STEPS BELOW

STEP ONE - ORDER SKIS - BLACK ONLY
NOTE : ALL SKIS ARE SOLD WITH STEEL RUNNERS INSTALLED, CARBIDES AVAILABLE IN STEP 3
 

STEP 2 - ORDER MOUNTING BRACKETS, SOLD IN PAIRS, ALL BLACK, ALL PARTS ARE POWDER COATED OR PLATED TO PREVENT CORROSION, INCLUDES BOLTS, NUTS AND RUBBER DAMPERS

STEP 3 - OPTIONAL CARBIDE RUNNERS, SOLD PER PAIR, 90 DEGREE CUTTING EDGE