ALUMINUM WASHERS

5/16 hold - round - square. Our aluminum washers will reduce your traction weight.
These aluminum washers are of the highest quality aluminum.
The domed design adds strength and makes it possible to tighten them up more than the flat style being sold by our competitors.
The top is flat for better contact with the stud - stamped.

ALUMINUM DISCS

Two sizes - 1/4 - 5/16. A premium washer made of high strength aluminum alloy, which is lighter.
Back side is counter bored to ensure a snug fit. Extra large, measuring 1-1/4" OD x 1/4" ID.
96 pieces per packaged - machined.

TNL "T" NUTS

Oval 7/8" x 1" -- 1/4" hole -- TNL "T" nuts should be combined with the OBX washer, which features the very successful,
elusive OBROUND design. The 2-prongs on the "T' Nut, when installed with the prongs perpendicular to the
rotation of the track, remain in the track and do not damage the track by working in and out like the 3-pronged "T" nuts.
At the same time, the larger head improves rigidity. Available in standard package of 96 pieces or bulk packages of 250 pieces.

TRACK BOLTS & NUTS

May be u7sed in place of rivets on cleated tracks. Specially designed flat alloy steel bolts which hold firmly to track.
Locking nuts have steel washer permanently affixed.

OBX96 WASHERS

OBX96 washers are thinner and lighter. The exclusive oval shape can be installed in two
different directions to increase or decrease traction slightly.
The rib which is added to the OBX washers increase stiffness and permit the use of lighter material.
Designed to use with all the Obround Head Studs.

NYLON LOCK NUTS

"DISH-HEAD" T-NUT

Lightweight dish-head T-nut that offers a stronger head configuration that lessens the chances of bending or stud loss.
The domed head grips the track without damage from "T" nut prongs.

T-NUT STANDARD HEAD

Designed for all Gold Digger and other studs.
Available for both standard and high performance tracks.

T-NUT SHORT SHANK STANDARD LENGTH

Designed with standard head for competition or the thinner 2 ply tracks.

T-NUT - 1" HEAD

Designed with a full 1" diameter head and a thicker material for a maximum holding strength.
2 size hole diameters available.

HARDENED T-NUTS

SHIM WASHER

These .050" shim washers will allow you to raise your stud height if desired. 48 Pieces per package.