ARCTIC CAT KITTY CAT - Z 120 STUDS

Steel (.600") 30° Tip * 24 studs * Round steel washers and T-Nuts (1/4 - 20)

SIX POINT STAR STUD AND BOLT

This is a most unique stud design. It is one of the few which provides a beneficial combination of acceleration,
braking, and cornering. The steel stud is made durable by through-hardened heat treating process.
Needed for installation is the Star Bolt and a square or round support plate.

GOLD DIGGER CARBIDE

1/4" - 20. 7mm. The finest carbide steel made with brazed construction guaranteeing the carbide not to come out
and allowing field sharpening. Domed washers provide a secure mount when used in rubber tracks.
80 degree point maximizing penetration and four sizes to accommodate all track styles.
Package of 24 complete with T-nuts - bulk package with studs only. BACKING PLATES SOLD SEPARATELY.

GOLD DIGGER II STEEL

1/4" - 20. similar to our Gold Digger II, however, this stud is designed for competitive use.
Manufactured of high quality, hardened steel and a sharpened point for a more aggressive traction with a minimum of
stress on your track. "Thin Profile" .700 * .370 thread length
Package of 24 complete with T-nuts. BACKING PLATES SOLD SEPARATELY.

GOLD DIGGER II STEEL

A high quality hardened competition steel single point stud with 60 degree point providing aggressive traction with
a minimum of stress on track components. Easily sharpened. Thread length .370.
Package of 24 complete with T-nuts - bulk package with studs only. BACKING PLATES SOLD SEPARATELY.

DRAG ELIMINATOR

This steel stud is designed exclusively for thin belted tracks and drag racing.
This stud has a short .270" thread length so it will not protrude through the T-Nut. Light, sharp, hardened steel, durable.
BACKING PLATES SOLD SEPARATELY.

CARBIDE SUPER WEDGE

The most durable stud ever made. A "NEW" wedge concept. It is lighter, stronger, more aggressive.
A complete change from the previous studs. Package of 24 complete with T-nuts.
BACKING PLATES SOLD SEPARATELY.

ELIMINATOR STEEL

"For Competition Use." A top quality Woody's drag stud manufactured of a high alloy hardened steel and is available in 2 sizes.
BACKING PLATES SOLD SEPARATELY.

"CHISEL TOOTH" STUD

Four sizes. The most aggressive single point stud available for ice or dirt, giving you the most positive
traction available, once the ground surface is penetrated. Can be used with either rubber or cleated tracks.

ELIMINATOR - STEEL

30° Competition Stud

GOLD DIGGER - CARBIDE

60° Trail Stud

CHISEL TOOTH - STEEL

Competition Stud

"CHISEL TOOTH" PUSH-THRU STUD - STEEL

Competition Stud with a Traction Master shaped head and a very aggressive single point head. Seven sizes.

GOLD DIGGER TRACTION MASTER
MODIFIED CARBIDE

Six sizes. A Gold Digger Traction Master modified with a machine point sharpened for excellent penetration.
For the rider who wants the penetration to play with the big boys on the lake.

STEEL TRACTION MASTER

Two sizes: .875" and 1.000". Designed for trail riding, this unique stud is a sister to the proven carbide Traction Master.
This new stud has a 60 degree tip with a 7mm shank.
We utilize a 7/8" head size to support the stud from pulling through the rubber belting.

DRAG ELIMINATOR TRACTION MASTER

This steel stud is appealing to the aggressive drag racer. The stud is designed exclusively for thin belted and cleated tracks.
It has a shorter unthreaded shank to allow the head to compress the belting for maximum stability.

ELIMINATOR STEEL TRACTION MASTER

Two sizes: 1/4" - 28 & 7mm. Designed for competition use only. This steel traction master has a unique 30 degree tip that
penetrates into the hardest ice. The head design cups into the rubber belt to lock its 3/4" head for excellent stability.

MEGA-BITE CARBIDE

Mega-Bite is a unique multi-directional steel stud with four flat surfaces on the penetration portion of the 5/16" shank.
The added contact surface will provide enhanced acceleration and deceleration. The black coated through, hardened stud has
Woody's exclusive 60° carbide tip. The Mega-Bite is a step ahead of the competition.
Offered in 7 lengths - all packages with nylon lock nuts. 15/16" diameter head. Zinc coated - carbide.

SIGNATURE SERIES™
STAINLESS STEEL 60° CARBIDE STUD

Wood's combines the advantages of stainless steel with their performance proven designs at a competitive price.
The high corrosion resistance allows you to use the Signature Series™ in rigorous environments and maintain its attractive bright appearance.
The stainless steel combined with the 5/16" shank and the 15/16" head of the Signature Series™ is resistant to impact even at extreme
temperature variations ensuring you a reliable grip on the trail with the 60° carbide tip. Available in popular lengths of
1.000", 1.075", 1.175", 1.325" and 1.450" in packages of 48, 96, 144 and 1,000 pieces all containing steel lock nuts.

60° CARBIDE GOLD DIGGER
TRACTION MASTER STUDS

A stud that can be used by trail riders or lake racers alike. Allows advanced traction on hard packed and icy trails with
excellent durability. Woody's latest improvement to its best selling line of studs is this new 60° traction master stud which is
sharper and larger in diameter. Offered in 4 sizes with 7mm thread diameter - 7 sizes with 5/16" thread diameter.

ROAD RUNNER CARBIDE STUDS

3 sizes * 5/16"
A newly designed stud with a flat tip to reduce wear on the driveway or highway surface.
Traction is provided by the edges of the carbide tip and penetrating pressure.