MICRO-LITE AND MICRO-LITE INTENZ BARS
IT TAKES LESS POWER FROM
THE SAWS TO MAKE THE SAME LENGTH OF CUT WITH A NARROW-KERF BAR/CHAIN CUTTING
SYSTEM THAN WITH A STANDARD BAR AND CHAIN. MICRO-LITE IS THE BAR FOR
OCCASIONAL WOODCUTTERS WHO WANT NARROW-KERF ADVANTAGES
| PITCHES |
BODY TYPE |
NOSE TYPE |
NOSE RADIUS:
SMALL OR STANDARD |
RECOMMENDED SAW SIZES |
AVAILABLE LENGTHS |
| .325" (95VP CHAIN, MLB BARS) |
LAMINATED |
NON REPLACEABLE SPROCKET NOSE |
SMALL |
2.2 - 3.5 CU. IN. (35-57 CC) |
13" - 20" (33-50 CM) |
| MINI 3/8" (90SG CHAIN, MLE BARS) |
LAMINATED |
NON REPLACEABLE SPROCKET NOSE |
SMALL |
UP TO 2.4 CU. IN. |
10" - 16" (25-41 CM) |
FEATURES
-Thickness of side laminates is reduced to work with narrow kerf
chains -Available in models with INTENZ tensioning mechanism built into the
bar itself.-Available in two gauges: .043" "MLE" bars for use with mini 3/8"
pitch 90SG chain. .050" gauge "MBL" bars for use with .325" pitch 95VP chain.
never install .043" gauge chain on a .050" gauge bar.
*Note - always
install a micro-lite chain in order to obtain all the advantages of a narrow-kerf
cutting.
BARS THAT ARE HIGHLIGHTED ARE INTENZE
BARS
|
FITS MODELS:
HT70, HT75, HT100, HT101; ANSI B175.1 regarding reduced
kickback does not apply to pole saws. |
|
BAR LENGTH |
CHAIN INFO |
SPROCKET
TEETH |
OREGON / OUR
BAR PART # |
ITEM PRICE |
BUY NOW |
|
PITCH |
GAUGE |
TYPE |
# LINKS |
USE CHAIN PART # |
| 12 |
3/8" |
.043 |
90SG |
044 |
90SG44G |
6 |
124MLEA074 |
|
|
| 14 |
3/8" |
.043 |
90SG |
050 |
90SG050 |
6 |
144MLEA074 |
|
|
| 16 |
3/8" |
.043 |
90SG |
055 |
90SG55G |
6 |
164MLET074 |
|
|
