`
Bobcat: XDTBS420, XDTBS421, XDTBS422, XGDXS120, XGDXS121,
XT2000, XTB43012 and XTB43022
Ferris: Hydowalk Series
Great Dane: Chariot, Kohler 25HP
Snapper: Pro 8 Gear, Pro 8 Mid-size gear drive, Pro gear drive and Pro hydroB
1" ID x 3.5" HT * 6" PULLEY * USES 1/2"
or 5/8"
BELT
1" ID x 3 3/4" HT * 6" dia pulley * uses 1/2" or
5/8" belt * made by OEM supplier Exmark: Turf
Ranger 1800 and Turf Ranger, Serial No. 149,999 and lower, 160,000-169-999 and
190,000-369,999
Husqvarna: YTH1848 series, YTH2048A, YTH2148 series, YTH2448 series and
YTKH1848 XPC
EXMARK Lazer Z Serial No. 160,000 and higher and MS200F;
for 25 HP engines
ID:1 1/8", Height:3 5/8", Diameter Pulley:6 5/16", Direction: Clockwise,
Uses belt width:5/8"
OEM #
ITEM #
YOUR PRICE
BUY NOW
BAD BOY 070-5035-00 BIG DOG: 787366, 787366K BOBCAT 2721337 BUNTON: 2721337 EXMARK 1-631732, 1-641300, 103-0501, 103-0665, 631732, 641300 GRASSHOPPER 388740 GREAT DANE: 180265 HUSTLER 787366, 787366K TORO 103-0501, 1-631732, 1-641300, 103-0665, 631732, E631732 WARNER 5218-65, 5218-65 E, 5218-165, 5218-213, 5218-225 STENS 255-551, 255-552, 255-552X ROTARY 11237 XTREME: X0049, X0104, X0248, X0457 POWERSTART ELECTRICAL: 19-457
Fits Exmark 18 and 22 HP
lazer Z below serial no. 159,999, does not include hardware,
ID:1", Height:3 3/8", Diameter Pulley:6 5/16", Direction:
Clockwise, Uses belt width:5/8", Does not include hardware
PICTURE
OEM #
ITEM #
YOUR PRICE
BUY NOW
EXMARK 103-0500
EXMARK 103-0661
EXMARK 103-0662
SCAG 461397
WARNER 5218-21
WARNER 5218-21
WARNER 5218-293
WARNER 5218-76
WARNER 5218-76 C
STENS 255-555
ROTARY 11133
Exmark Lazer HP and Lazer
Toro 48" and 52" Pump Drive Z 400
Wright Mfg. Sentar 48", 52" and 61" decks
PLEASE ORDER BY THE WARNER NUMBER LOCATED
ON YOUR CLUTCH
PICTURE
OEM #
ITEM #
YOUR PRICE
BUY NOW
EXMARK 1-65304
EXMARK 1-653048
EXMARK 1-653292
EXMARK 103-0690
EXMARK 109-5876-S
EXMARK 109-9276
EXMARK 653048
TORO 103-0690
TORO 105-3630
TORO 109-2916
WARNER 5218-201
WARNER 5218-215
WARNER 5218-44
WARNER 5218-80
WARNER I-5218-80-C
WRIGHT MFG 71410013
STENS 255-560
ROTARY 12261
Exmark: Lazer Z
AC, Serial No. 440,000 and higher and Lazer Z AS, Serial No. 440,000-669,999
Toro: Z Master Z500, Z528 and Z553
1"
SHAFT, 7-1/8" PULLEY DIAMETER, 5/8" BELT.
Dixie Chopper: Run Behind, Silver Eagle LT and Silver Eagle SE series
Exmark: Lazer Z HP, Serial No. 720,000 and higher
1-1/8"
ID 7.2" PULLEY, 5/8" BELT, 200 LBS TORQUE
FITS MODELS
EXMARK LAZER HP, FOR 27 HP
KOHLER ENGINES,
ALSO FITS TORO Z557, Z588E, Z500, Z560 Z MASTERS
1-1/8" ID X 3-5/16" HT, 7 11/32" DIA. PULLEY, USES 5/8" BELT, CLOCKWISE DIRECTION
PICTURE
OEM #
ITEM #
YOUR PRICE
BUY NOW
EXMARK: 103-6579 (PLEASE MATCH
WARNER #)
EXMARK 109-7665
EXMARK 109-7673
EXMARK 103-3132
WARNER 5218-202
WARNER: 5218-99
PRIMELINE 7-06293
STENS 255-459
STENS 255-488
ROTARY 12403
TORO 109-7665
TORO 109-7673
TORO 103-3132
Exmark: Lazer Z
S, E and X series, Serial No. 312,000 and higher; Next Lazer Z, air-cooled,
Serial No. 790,000 and higher and Next Lazer Z ASX, Serial No. 850,000 and
higher; Quest SP, Serial No. 850,000 and higher
Toro: Z Master G3 turbo force, Serial No. 290000001-312999999, 48", 52",
60" and 72" decks
Height: 3 1/4 ", ID: 1 1/8 ", Diameter Pulley: 7 13/32 ", Direction:
Counter clockwise, Uses belt width: 5/8 ", Adjustment and maintenance free,
Designed for rugged use
For proper ordering, reference Warner or Ogura part number stamped on clutch
Exmark: Quest, Serial No. 790,000 and higher, 48" and 52" deck
Toro: SS5000, SS5060, ZS5000, Z5020, Z5030, Z5035, Z5040, Z5060, Timecutter,
Titan Z4800, Z5200, ZX5000 and ZX5020
Height: 3.6", ID: 1", Diameter Pulley: 5.8", Direction: Counter
clockwise, Uses belt width: 1/2", Adjustment and maintenance free, Designed
for rugged use
For proper ordering, reference Warner or Ogura part number stamped on clutch
PSEP5219-13 ORIGINAL EQUIPMENT WARNER - 12 Month warranty by PSEP(PowerStart Electrical
Products) from date of purchase to be
free of defects.
Most recommended version for Non Dealer Installations
$180.04 and ONLY $9.95 FLAT Rate Shipping Per
Whole Order
EXMARK Lazer Z, LAZER Z XS, LAZER Z LC, LAZER Z AS
TORO Z550 Z master Model #'s 74272, 74273. Z555 Z MASTER MODEL #'S
74245. Z587L Z MASTER MODEL # 74250, 74251, 74252, Z558 Z MASTER MODEL #
74271, 74272, 74273
ID: 1-1/8", Diameter Pulley: 7-5/32", Direction: Clockwise, Uses belt width: 5/8", Adjustment and maintenance free, Designed
for rugged use
For proper ordering, reference Warner or Ogura part number stamped on clutch
EXMARK Lazer Z AS
TORO Z MASTER G3 RIDING MOWER MODEL # 74951, Z MASTER 3000 SERIES
MODEL # 74952, 74953, 78953
ID: 1-1/8", Diameter Pulley: 7-3/8", Direction: Counter
clockwise, Uses belt width: 5/8", Adjustment and maintenance free, Designed
for rugged use
For proper ordering, reference Warner or Ogura part number stamped on clutch
ID: 1-1/8", Diameter Pulley: 7-5/32", Direction:
clockwise, Uses belt width: 5/8", Adjustment and maintenance free, Designed
for rugged use
For proper ordering, reference Warner or Ogura part number stamped on clutch
OEM #
ITEM #
YOUR PRICE
BUY NOW
EXMARK: 116-1611
EXMARK: 103-6579 (MATCH WARNER #)
TORO: 116-1611
TORO: 103-6579 (MATCH WARNER #)
WARNER: 5218-209
Toro 612-Z, Serial No. 1000001-1999999, 616-Z and 620-Z, Serial No.
100001-599999, 616-Z, Serial No. 390000001-499999999 and Z118, Serial No.
79000001-79999999
ID:1", Height:3 1/2", Diameter Pulley:5 3/8", Direction: Clockwise, Uses
belt width:1/2", Made by an OEM supplier
`
